Garage Transformation in Bend, OR: Polyurea Coating, Custom Cabinets, and Slatwall

One Bend, Oregon homeowner had a garage with great bones and nothing to show for it. Bare concrete. Cluttered walls. Storage scattered across the floor. Sound familiar?

We came in and did what we do best: a complete, top-to-bottom garage transformation. Polyurea floor coating across the garage, back patio, and front entry. Custom powder-coated cabinets. Commercial-grade slatwall storage. A workspace with a butcher block countertop. By the time we finished, the homeowner had a garage that's cleaner, more organized, and more beautiful than most living rooms.

The full project at a glance

Two accepted proposals, combined into one comprehensive garage makeover. Three concrete coating areas, fully custom cabinets, and a heavy-duty slatwall system, all installed by our Webfoot crews in Bend, Oregon.

• Garage floor coating: 767 sq ft of polyurea and polyaspartic in Mediterranean color
• Vertical stem walls: 82 linear feet, coated up the wall for a finished look
• Back patio coating: 255 sq ft, same Mediterranean color for cohesion
• Front entry porch: 106 sq ft, coated and finished with slip resistance
• Custom garage cabinets: Pewter Hammertone with brushed nickel hardware, including tall storage units, base drawers, uppers, and a 25" x 72" butcher block countertop
• storeWALL Heavy Duty slatwall: Commercial-grade PVC panels in Barnwood, with a hook bundle included

Polyurea floor coating: way better than epoxy

If you've been searching for an epoxy garage floor coating in Bend, OR, here's something most people don't realize: polyurea is significantly better than epoxy on every measure that matters. We use Penntek Industrial Coatings' polyurea and polyaspartic system, which is the same technology trusted in commercial facilities, aerospace hangars, and industrial kitchens.

Why polyurea outperforms epoxy

• 4x stronger and 10x more flexible than epoxy. It bends with concrete movement instead of cracking.
• UV stable. Won't yellow, fade, or chalk in the sun. Critical for patios, entries, and pool decks.
• Fast cure. Walk on it in 12 hours. Drive on it in 48. Epoxy can take 5 to 7 days.
• Temperature tolerant. Installs and cures across a much wider temperature range, which matters in Central Oregon.
• Non-porous, chemical resistant, antibacterial, and antimicrobial. Oil drips, road salt, mud, spills, all wipe right off.
• Lifetime product warranty. Penntek backs the system with a residential lifetime limited warranty against chipping, peeling, and delaminating.

Epoxy was the standard in the 1990s. Polyurea is what professional contractors install today. The difference is dramatic, and it's the reason we never compromise on the coating system we use.

How we prepped this floor

The polyurea system is only as good as the prep work underneath it. For this project, we used industrial-grade propane walk-behind diamond grinders to fully profile the existing concrete, removing any contamination and creating the texture polyurea needs to bond. Triple-filtered HEPA industrial vacuums collected the dust. Then we laid down the polyurea basecoat, fully broadcast color flakes, scraped excess, and topped with a polyaspartic finish coat.

For slip resistance, exterior areas got our 4095 silica sand and Gator Bite blend, which gives the patio and front entry the grip you need without sacrificing the beauty of the finish.

Custom garage cabinets, built to order

Off-the-shelf garage cabinets are designed to a price point. Our cabinets are designed to your space. Every piece in this project was custom-built to fit the homeowner's exact garage layout, down to the inch.

What makes our cabinets different

• Professional dado joint construction. Load is distributed along the full panel length, so cabinets don't sag, cup, or tilt over time.
• Fully powder-coated steel and powder-coated wood. Inside and out, every surface, including the back panel. Most competitors leave the back open. We don't.
• Eco-friendly materials. TSCA Title VI compliant, LEED qualified HDF and MDF wood from sustainable forests, and powder coating with no VOCs or hazardous air pollutants.
• Soft-close doors and drawers. Standard, not an upgrade.
• Solid wood butcher block tops with polyurethane coat, perfect for a workbench or staging surface.
• Made in the USA. All cabinets are manufactured and powder coated in Caldwell, Idaho.

For this project, the homeowner picked Pewter Hammertone for both boxes and doors, brushed nickel pulls, and a 25" by 72" butcher block countertop. Tall units flank the workspace for full-height storage. Base cabinets give counter-height work surface. Uppers maximize vertical space.

Slatwall: every inch of wall, working for you

Slatwall turns blank wall space into the most flexible storage system you can install. Every accessory locks in, slides over, or hangs from the slats. Tools, sports gear, bikes, ladders, garden equipment, all up off the floor and easy to find.

This project used the storeWALL Heavy Duty system in Barnwood. The panels carry up to 300 lbs per square foot, and they slot at the industry-standard 3-inch spacing, which means the homeowner can buy any 3-inch on-center accessory and it will work. We included a courtesy hook bundle to get them started.

The patio transformation

The same Mediterranean polyurea finish that protects the garage flows out to the back patio. The result is a cohesive, intentional look that ties the home together, plus a patio surface that wipes clean, won't stain, and stands up to Central Oregon's UV and weather.

The front entry porch got the same treatment, with vertical drop edges and house-foundation walls coated where appropriate. The whole exterior coating package adds curb appeal that lasts for decades.

Choosing the color

One of the best parts of every coating project is the color selection. Webfoot brings physical sample boards out to your home so you can see how each chip blend looks in your actual space and lighting. The homeowner picked Mediterranean, a natural gray-and-tan blend that complements the home's exterior and hides everyday wear.

The benefits add up fast

For the floor

• Non-porous surface that wipes clean instantly
• Antibacterial and antimicrobial for a healthier garage
• Slip-resistant where it matters (patio, entry, pool deck)
• UV stable for outdoor areas
• Won't crack, peel, or delaminate
• Easy to clean with household cleaning products

For the cabinets and slatwall

• Custom sizing means zero wasted space
• Powder-coated steel resists scratches, stains, and moisture
• Soft-close mechanisms feel premium and last longer
• Modular slatwall accessories let you reconfigure as your needs change
• Made in the USA with a 5-year cabinet warranty

The Webfoot process

1. Free in-home estimate. We come to you, measure everything, and design around your space.
2. Design review. You approve the cabinet layout and color choices before we manufacture a single piece.
3. 50% deposit. Custom materials are ordered. Your project is locked into our schedule.
4. Professional install. Grinding, coating, cabinet install, and slatwall, all in the right sequence by our crews.
5. Walk-through and sign-off. You meet our crew lead, inspect everything, and walk away with a finished space and a clean job site.

Warranty coverage that actually means something

• Lifetime limited Penntek product warranty on the coating system, covering chipping, peeling, and delaminating
• 2-year residential labor warranty from Webfoot on the coating installation
• 5-year full labor and product warranty on the garage cabinet system, including the powder coating finish

Garage transformation in Bend, Oregon and Central Oregon

Homeowners across Bend, Redmond, Sunriver, Sisters, La Pine, Tumalo, and the rest of Central Oregon are discovering that a polyurea garage floor coating combined with custom cabinets and slatwall storage is the single highest-impact upgrade they can make to a home. It's the room you walk through every day, and for most homes, it's the most underused space.

If you've been thinking about a garage floor coating, custom garage cabinets, slatwall storage, or a complete garage makeover, this project is what's possible. We coat patios and front entries too, so the same finish can flow seamlessly from inside to outside. And if you're searching for "epoxy garage floor near me" or "garage cabinets Bend OR," you've found the right team.

Garages, we love you. But you can be so much more. A gym. A workshop. A refuge. It all starts with a Webfoot concrete coating, and the right storage system to back it up.

Ready to stop apologizing for your garage? Request an appointment time that works best for you.
‍