Custom Garage Cabinet Costs in Bend for 2026

Custom Garage Cabinet Costs in Bend for 2026

Most custom garage cabinet projects in Bend run between $5,100 and $26,800, and the typical project lands at $14,800.

Those aren't estimates. They come from 119 garage cabinet and storage projects Webfoot completed for Central Oregon homeowners between January 2025 and October 2026. We publish the full set on our pricing page, along with every other service we sell.

A range that wide isn't much use on its own, so here's what sits at each end of it and what moves your number up or down.

WHAT GARAGE CABINETS COST IN CENTRAL OREGON

  • Custom garage cabinets: most projects $5,100 to $26,800, typical project $14,800, across 83 projects.
  • Cabinets plus slatwall or overhead storage: typical project $17,000.
  • Storage only, like slatwall or an overhead lift: most projects $2,100 to $8,600, typical project $2,700, across 36 projects.

"Most projects" covers the middle 80%, so one in ten jobs comes in under the low number and one in ten comes in over the high one. "Typical" is the median, meaning half of homeowners paid less and half paid more.

Nothing here is a quote. Your garage has its own dimensions, its own wall obstacles, and its own list of things you need to put away, and an accurate price takes a free on-site bid.

WHAT A $5,100 GARAGE AND A $26,800 GARAGE ACTUALLY LOOK LIKE

The gap between those two numbers is mostly about how much wall you're covering and how much of the garage becomes a workspace.

Near the low end, you're looking at a focused run of cabinets on one wall. A few tall units for yard tools and gear, a couple of uppers, and that's the project. The garage gets clear floor and a place for everything that used to stack up in the corner.

Near the high end, cabinets wrap most of the garage. There's a workbench with a finished countertop, tall storage on both ends, uppers across the back, slatwall for hand tools, and overhead racks for the bins that only come down twice a year. Specialty units, like a locker column for ski gear or a dedicated cabinet sized to a tool chest you already own, push it further.

Both are real projects we built this year. They're different sizes of the same idea.

WHAT MOVES THE PRICE

How many cabinets. This is the big one. Price tracks linear feet of wall, and tall units cost more than base units because there's more material and more mounting work in them.

How much workspace. Workbenches, countertops, and specialty units cost more per foot than straight storage cabinets. A garage built around a working bench prices differently than a garage built around putting things away.

Add-ons. Slatwall and overhead storage get added to roughly a third of cabinet projects. Cabinet projects that included them ran a typical $17,000, about $2,200 above cabinets alone.

Which cabinet line you choose. We carry two, and the spread between them is real money. More on that next.

Your garage's quirks. Sloped floors, water heaters, electrical panels, and odd wall angles all take design work. We build every cabinet to your exact measurements rather than fitting standard boxes around the problem, so this shows up as design time instead of as gaps in your finished garage.

STRUX PRO CHANGED THE LOW END OF THE RANGE

Until this fall, every cabinet we sold came from the Strux Elite line. In November we launched Strux Pro, a second line that runs 25 to 35% below a comparable Elite layout, averaging about 30%.

Strux Pro uses the same powder-coated MDF, the same finish, and the same 500 lb per-cabinet rating. Cabinets go up to 36 inches wide, 24 deep, and 92 tall, with 21 types to choose from. The savings come from a simpler build: no back panels, and cabinets of the same type share a side wall when they sit next to each other.

The trade-off is layout flexibility. Elite gives you more ways to customize, which matters in a garage with tricky dimensions. Pro covers most garages well, and if you mainly want big, strong cabinets on your wall, it gets you more of them for the same budget.

We helped Strux design the Pro line and installed the first one in La Pine this fall. Your designer will price both during your consultation so you can see the difference on your own layout.

STORAGE WITHOUT CABINETS

Not every garage needs a full cabinet system. Slatwall and overhead racks handle a lot of clutter on their own, and storage-only projects ran a typical $2,700, with most falling between $2,100 and $8,600.

Slatwall takes bikes, yard tools, extension cords, and anything else that hangs. Overhead lifts put seasonal bins and roof boxes above the cars where they stop taking up floor. Plenty of homeowners start here and add cabinets in a second phase.

CABINET PRICES WENT UP THIS YEAR

We'd rather tell you this than have you find out at the bid.

The typical cabinet project cost $13,900 in 2025 and $16,900 so far in 2026, a 22% increase. Material costs drove most of it. That's the steepest climb across anything we sell this year. For comparison, garage floor coatings held flat at $5,600 and residential painting rose about 5%.

Strux Pro is part of our answer to that. So is financing, which spreads a cabinet project over monthly payments instead of a single check. Your estimator can walk through the options during the bid.

DOING THE FLOOR AT THE SAME TIME

About a third of our cabinet customers coat the garage floor in the same project. A typical polyurea coating runs $5,600, with most between $3,700 and $8,900.

Bundling them saves a mobilization and gets the sequence right. On that first Strux Pro job in La Pine, the floor went down on a Friday and the cabinets went in Monday and Tuesday, so the homeowner had a finished garage in three days. Coating a floor after cabinets are mounted means working around them, and it costs more.

WHAT TO ASK ANY CABINET COMPANY IN BEND

Bids in this category are hard to compare because the products underneath them differ so much.

What's the box made of, and is every surface finished? Melamine swells when it gets damp, and bare particleboard edges are where that starts. Every surface of ours is powder-coated, inside and out. We wrote up the full material comparison if you want the detail.

How are the joints built? Dado joints spread weight across the whole panel. Cam-lock cabinets, which is what most modular kits use, sag and lean over time under real garage loads.

Is it custom or modular? Modular systems leave gaps where the standard boxes don't reach your wall. Ask whether custom sizing costs extra. Ours doesn't.

What's the weight rating, and is it warrantied? A number with no warranty behind it is marketing.

What's actually in the price? Delivery, install, hardware, and cleanup should all be in there. Cabinet buyers get burned most often on what the quote left out.

GETTING A REAL NUMBER FOR YOUR GARAGE

Ranges tell you whether a project is in reach. They can't tell you what your garage costs, because that depends on your walls, your gear, and how you want to use the space.

Book a free on-site bid and a designer measures your garage, builds 3D renderings of a couple of layouts, prices Strux Pro and Strux Elite side by side, and leaves you with an exact number. It takes about a minute to book, and there's no charge and no obligation.

We design and install custom garage cabinets in Bend, Redmond, Sunriver, Sisters, La Pine, and across Central Oregon.

FREQUENTLY ASKED QUESTIONS

How much do custom garage cabinets cost in Bend, Oregon?

Most custom garage cabinet projects in Bend run between $5,100 and $26,800, and the typical project costs about $14,800. That's based on 83 cabinet projects Webfoot completed in Central Oregon between January 2025 and October 2026. Projects that also add slatwall or overhead storage run a typical $17,000. The number of cabinets, how much workspace you build in, and which cabinet line you choose drive the price.

How much does slatwall or overhead garage storage cost on its own?

Storage-only projects, like a run of slatwall or an overhead lift, ran a typical $2,700, with most falling between $2,100 and $8,600 across 36 projects in 2025 and 2026. Many homeowners start here and add cabinets later.

Why do garage cabinet prices vary so much?

Price tracks how much wall you're covering and how much of the garage becomes a workspace. A focused run of cabinets on one wall sits near the bottom of the range. Cabinets wrapping the garage with a workbench, countertops, slatwall, and overhead racks sits near the top. Tall units and specialty cabinets cost more per foot than base units.

What's the most affordable way to get custom garage cabinets?

Strux Pro, our newer cabinet line, costs 25 to 35% less than Strux Elite on a comparable layout, about 30% on average. It uses the same powder-coated MDF and carries the same 500 lb rating, with a simpler build and 21 cabinet types instead of full custom layout flexibility. Financing is also available if you'd rather spread the project across monthly payments.

Did garage cabinet prices go up in 2026?

Yes. The typical Webfoot cabinet project cost $13,900 in 2025 and $16,900 in 2026, an increase of about 22%, driven mostly by material costs. Garage floor coatings held flat at $5,600 over the same period.

Should I coat the garage floor at the same time as the cabinets?

It usually costs less to do both together, since it saves a mobilization and gets the order right. Coating the floor first and installing cabinets after means no one works around finished cabinets. A typical polyurea garage floor coating runs $5,600, with most between $3,700 and $8,900.

Are these prices a quote?

No. They show what Central Oregon homeowners actually paid between January 2025 and October 2026, after discounts. Your price depends on your garage, so it takes a free on-site bid. You can book one online in about a minute.